eGo LCD Electronic cigarettes and eGo batteries with LCD screen

SLB EGO-V V4 MEGA BATTERY 1300 mah with VV and VW and ohm meter

SLB EGO-V V4 MEGA BATTERY 1300 mah with VV and VW and ohm meter.

The main upgrade feature is of course the Variable Wattage feature. There are also extra safety features added and improved wiring in the V4.
Main Features:

  • Variable Voltage: 3.0v to 6.0v in 0.1v increments.
  • Variable Wattage: 3.0w to 15.0w in 0.5w increments.
  • Easy OHM MeterON/OFF switching
  • Ohm checker … screw on an atty and it reads the resistance automatically
  • USB Pass Through with cable.
  • Automatically shuts down when it requires recharge
  • 510/eGo Connection capability
  • OLED LCD screen
  • Short circuit or low resistance safety – unit will cut off power and display “LOR” on the LCD screen.
  • LCD Sleep mode – LCD will not display if either the “+” or “-” buttons are not pressed for 20 seconds – conserving battery life.

Operating the SLB Mega V4:

  1. ON/OFF: Click the fire button 5 times within 3 seconds to toggle the unit on and off.
  2. Ohm/Resistance Meter:Press and hold the “-” button about 2+ seconds and it will display the atomizer resistance.
  3. SLB Button Lock: So that you don’t accidentally press the buttons when carrying in your pocket or your purse or otherwise just using the unit you can press and hold both “+” and “-” buttons simultaneously for about 5 seconds and a small LOCK icon will appear indicating that your unit is LOCKED and the buttons are inactive and you can’t accidentally change your wattage or voltage.
  4. SWITCHING BETWEEN VARIABLE VOLTAGE AND VARIABLE WATTAGE: Press and hold the “+” button about 2+ seconds to toggle back and forth between voltage and wattage variable modes. I small “v” for variable voltage or a small “w” for variable wattage will appear on the screen.
  5. CHANGING THE VOLTAGE/WATTAGE LEVELS: Press the “+” or “-” buttons to go up or down. The unit will “round robin” when it reaches the end on either extreme.

Dimension and Metrics:

  • Length: 141mm without cartomizer
  • Width: 17mm
  • 1300mah battery capacity
  • Maximum Current Output: 2.5AMP
  • Input: DC 5V 500mA
  • Charging Time: 3-4 hours. It is suggested to charge the unit when you are down to 1 bar on the charge level on the LCD screen, this will ensure longer battery life.

Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Post Navigation